You May Be the Prime Contractor Without Knowing It
In British Columbia, if two employers have workers on a site at the same time and nobody has signed an agreement saying otherwise, the owner is the prime contractor. Not by choice, not by negotiation, by default.
And "owner" is broader than people assume. It can be the property owner, a tenant, a property manager or an agent of the owner. A building manager who books a plumber and an electrician for the same morning has created a multiple-employer workplace and become responsible for coordinating safety across it.
The trigger is lower than you think
The Workers Compensation Act defines a multiple-employer workplace as a workplace where workers of two or more employers are working at the same time.
That is the whole test. Not a construction project, not a certain contract value, not a certain number of people. Two employers, same workplace, same time.
Prime contractor requirements apply only where that condition exists. A site with one employer or one contractor does not need a prime contractor, which is why the question only arises the moment a second trade turns up.
The Act then defines the prime contractor as either the directing contractor, employer or other person who enters into a written agreement with the owner of that workplace, or, if there is no such agreement, the owner of the workplace.
There can be only one prime contractor on a site at a time. The role cannot be shared, split by area or rotated informally between trades.
What the role actually requires
The statutory duties are short, which makes them easy to underestimate.
The prime contractor must ensure that the activities of employers, workers and other persons at the workplace relating to occupational health and safety are coordinated. And it must do everything reasonably practicable to establish and maintain a system or process that will ensure compliance with the relevant part of the Act and the regulations in respect of that workplace.
That second duty is the heavy one. A system or process that ensures compliance across every employer on site is considerably more than attending a toolbox talk, and it is the element most often missing when something goes wrong.
There is a corresponding obligation running the other way. Each employer at a multiple-employer workplace must give the prime contractor the name of the person that employer has designated to supervise its workers at that workplace.
WorkSafeBC's information sheet on the role adds the practical layer: the prime contractor should know the work activities and hazards at the workplace, communicate hazards that could affect other employers and their workers, and coordinate between them.
Note that the older section number, 118, still appears in a lot of guidance and training material. The current provisions sit at section 13 for the definitions and section 24 for the duties.
Three steps the owner is supposed to take
Designating a prime contractor is not a handshake, and the process has defined steps.
First, establish a signed written agreement explaining what the prime contractor must do. Without the written agreement the designation has not happened, whatever anyone intended.
Second, conduct an onsite pre-work meeting with the prime contractor. That is where the actual hazards and the actual site get discussed rather than assumed.
Third, release the prime contractor from their duties in writing once the work is done. This is the step almost everyone skips, and it leaves the question of who carried responsibility during a given period genuinely unclear.
The owner has duties of their own regardless of who the prime contractor is. Among them is giving the employer or prime contractor the information known to the owner that is necessary to identify and eliminate or control hazards at the workplace.
That matters on older buildings in particular. An owner who knows about asbestos, a buried service or a structural issue and does not pass it on has failed a duty that sits on them rather than on the contractor.

Outfitting a multi-trade site?
Workman Industrial supplies PPE across every category and CSA-certified work boots, shipped across Canada.
Ontario calls it a constructor, and it is harder to escape
Ontario's equivalent is the constructor, defined under its occupational health and safety legislation as the party with overall authority for the project.
The duty is broader than BC's coordination role. The constructor must ensure that every employer and every worker on the project complies with the Act and its regulations, which extends well beyond the constructor's own employees.
And there is a point in Ontario's guidance that closes the obvious loophole: even if a general contractor subcontracts all of the actual construction work, the general contractor remains the constructor and retains overall occupational health and safety responsibility.
You cannot subcontract your way out of it. Handing every scope to someone else does not transfer the role.
Alberta uses prime contractor terminology closer to BC's. Each province frames it slightly differently, so confirm the test, the designation mechanism and the duties where you actually work rather than assuming the model you know travels.
Dual responsibility, not transferred responsibility
The most common misunderstanding among subcontractors is that working under a prime contractor hands over their obligations.
It does not. The system is one of dual responsibility: the prime contractor or constructor carries overall coordination responsibility, and each individual employer continues to carry responsibility for their own workers and their own work.
So a subcontractor still owns their own hazard assessment, their own training, their own equipment and their own supervision. The prime contractor coordinates between those systems rather than replacing them.
In practice that means a subcontractor arriving on site should know who the prime contractor is, provide the name of their designated supervisor, and raise hazards their work creates for others as well as the ones others create for them.
The equipment side is the subcontractor's own, including who pays for it, which is answered differently across the country and covered in our guide to who pays for work boots and PPE in Canada.
Where coordination actually bites
The reason this role exists is that the dangerous interactions on a site happen between employers rather than within them.
One trade creates a hazard another trade walks into. A floor opening cut in the morning, a service left energized, a trench left open over lunch, an area that has become a confined space because of someone else's work, hot work beside another crew's solvent.
Overhead work is the classic case. Anyone working below somebody else's task needs head protection and an exclusion zone, and neither happens unless somebody is coordinating across the two employers. Our hard hat safety guide covers the equipment side of that.
Rescue planning is another. A worker in a harness on a site with four employers needs a rescue plan that someone owns, and our guide to suspension trauma and fall rescue explains why calling emergency services is not that plan.
First aid coverage needs a single answer too, rather than each employer assuming another has it. Our guide to CSA Z1220 first aid kit requirements covers the classifications.
Traffic and public interface on a street-facing site is a coordination question by definition, covered in our guides to traffic control person equipment and CSA Z96 classes and levels.
If you might be the prime contractor
Start by asking whether two or more employers will have workers on your site at the same time, at any point. If yes, somebody is the prime contractor, and if nothing is in writing it is the owner.
Then find out whether an agreement exists. A surprising number of sites run for months with everyone assuming the general contractor holds the role on the strength of nobody having said otherwise.
If you are going to hold it, make sure you can actually do the job: know the activities and hazards on site, collect each employer's designated supervisor, run coordination meetings that produce decisions, and maintain the system that demonstrates compliance.
If you are not going to hold it, get the designation in writing to someone who can, hold the pre-work meeting, and release them in writing at the end.
Hazard information still has to flow regardless. Chemicals brought onto site by one employer affect everyone, covered in our guide to choosing chemical resistant gloves, and respiratory hazards created by one trade reach another, covered in our guide to respirator fit testing under CSA Z94.4.
For the wider programme see the complete PPE checklist for Canadian workers, our guide to PPE requirements for Canadian construction sites and our guide to CSA certified versus CSA compliant.
Frequently Asked Questions
What makes a site a multiple-employer workplace?
Workers of two or more employers working at the same time. That is the whole test under British Columbia's Workers Compensation Act. It is not limited to construction projects or large sites, so two trades in a building on the same morning qualifies.
Who is the prime contractor if nobody was appointed?
The owner, by default. The Act defines the prime contractor as whoever enters into a written agreement with the owner, or, failing that agreement, the owner of the workplace. "Owner" can include the property owner, a tenant, a property manager or an agent of the owner.
What does a prime contractor have to do?
Two statutory duties: ensure the occupational health and safety activities of employers, workers and others at the workplace are coordinated, and do everything reasonably practicable to establish and maintain a system or process ensuring compliance with the Act and regulations at that workplace. Each employer must also supply the name of their designated supervisor.
Can a general contractor avoid this by subcontracting everything?
Not in Ontario. Its guidance is explicit that even where a general contractor subcontracts all of the actual construction work, the general contractor remains the constructor and keeps overall occupational health and safety responsibility for the project.
Does working under a prime contractor remove my obligations?
No. The system is one of dual responsibility. The prime contractor or constructor carries overall coordination responsibility, and each employer continues to carry responsibility for their own workers and their own work, including hazard assessment, training, equipment and supervision.
What steps should an owner take when designating?
Establish a signed written agreement setting out what the prime contractor must do, conduct an onsite pre-work meeting with them, and release them from their duties in writing once the work is complete. The release step is the one most often skipped.
Supplying a site with several trades on it
Browse CSA-certified safety footwear and PPE at Workman Industrial, with Canada-wide shipping.
This guide is general workplace safety information, not legal advice. Prime contractor and constructor requirements, definitions and duties are set by provincial legislation and differ between jurisdictions, and section numbering has changed over time. Confirm your obligations with the occupational health and safety authority that governs your workplace, or with qualified legal counsel, before relying on any summary including this one.